/

Materials

Recycled aluminium: what the datasheet does not tell you

Portrait of Freja Holm

Freja Holm

Colour, material and finish

·

·

6 min

An aluminium part turning on a lathe

Three of our current projects specify recycled aluminium, and all three clients sent us a datasheet with the same line: 75% recycled content. The figure is true, and it tells you very little about how the part will look.

Which scrap, which alloy

First ask what the recycled content is. Pre-consumer scrap is offcut from the extrusion plant itself: clean, of known alloy and close to primary metal. Post-consumer scrap is old window frames and car parts, and it brings more iron, copper and zinc, which stay in the billet. Then ask about the alloy. 6063 is the usual choice for extruded parts you see and touch, because it anodises evenly. 6061 is stronger and machines well, but its extra copper and magnesium give a slightly greyer, less even anodised surface.

With a high post-consumer share, both drift. Iron above roughly 0.25% pulls a clear anodise toward grey, and the amount changes from cast to cast. On the Halo arm we measured a colour difference of up to 3 Delta E between two batches of clear-anodised 6063. That is enough to see when the arm and the base sit side by side.

A batch of machined aluminium parts
Six anodised 6063 samples from three casts. Same bath, same day, three shades.
  • Ask the extruder for the cast analysis, not only the certificate.

  • Agree a light and a dark limit sample with the anodiser, and have both signed.

  • Take parts that sit together from the same cast.

  • Bead blast before anodising. A matt surface hides more variance than a brushed one.

  • Prefer mid and dark colours. Clear and pale champagne show the most.

None of this is an argument against recycled metal. Remelting aluminium takes about 5% of the energy of making it from ore. It is an argument for designing the finish around the material you will really receive, and for showing the client the colour range before the tool is cut.

Portrait of Freja Holm

Written by

Freja Holm

Colour, material and finish

Owns four hundred anodised samples and can tell two casts of the same alloy apart by eye.

Have a product in mind?

Send a short brief. A partner replies within two working days with questions, a rough plan and a price range.

Next start: March 2027

Minimum engagement: $24,000

Create a free website with Framer, the website builder loved by startups, designers and agencies.